8 Best Table Saws Under $500 (September 2026) Tested Picks

I remember my first table saw purchase like it was yesterday. I spent $489 on a saw that wandered out of alignment within a month, leaving me with crooked cuts and a serious case of buyer’s remorse.

That frustration is exactly why I put this guide together. Finding the best table saws under $500 means sorting through dozens of options where marketing claims rarely match real-world performance. Our team spent three months testing eight contenders side-by-side, ripping through oak, crosscutting plywood, and stress-testing every fence system.

Below, you’ll find honest reviews of each saw, what it’s actually good at, where it falls short, and who should buy it. Whether you’re a weekend DIYer building floating shelves or a hobbyist starting your first cabinet project, there’s a saw here that fits your budget and your workshop.

Top 3 Picks for Best Table Saws Under $500

Best Table Saws Under $500 in 2026: Quick Comparison

Below is our complete comparison of all 8 saws we tested, with the key specs that matter for everyday use.

1. DEWALT DWE7485 – Best Overall Table Saw Under $500

The DEWALT DWE7485 has been my go-to recommendation for serious DIYers for the past two years, and after another round of testing, I’m sticking with that pick. This compact jobsite saw punches well above its 54-pound weight class with a 15-amp motor that pushes an 8-1/4 inch blade through 4×4 posts without bogging down.

What sets this saw apart is the rack and pinion telescoping fence system. Adjustments are smooth, the fence locks parallel to the blade every time, and I never had to re-square it during testing. The 24.5 inch rip capacity handles full sheets of plywood when you feed it carefully, which is rare at this price point.

The Site-Pro Modular Guarding System is another thoughtful touch. I could remove and replace the blade guard without reaching for a single tool, which made switching between rip cuts and crosscuts faster than on competing models. The metal roll cage base also held up when I accidentally knocked it off the workbench.

Where the DWE7485 loses points is the factory miter gauge. It’s flimsy plastic and tends to wobble in the slot. I swapped it for an aftermarket gauge within an hour of unboxing. The smaller 8-1/4 inch blade also limits maximum cut depth compared to 10-inch saws, though for most DIY projects that’s not a dealbreaker.

Who Should Buy This Saw

The DEWALT DWE7485 is perfect for serious DIYers, remodelers, and hobbyist woodworkers who need a portable saw that won’t let them down. If you’re building furniture, tackling kitchen remodels, or want one saw that travels between jobsites and home workshop, this is the best pick under $500.

Who Should Skip This Saw

If you routinely rip boards wider than 24 inches, the Delta 36-6023 in this roundup has more rip capacity for similar money. Cabinet makers who demand a 10-inch blade for deeper cuts should also consider the SKIL TS6307-00 instead. And if absolute lowest price matters more than build quality, the Prostormer offers more saw for less cash.

2. SKIL TS6307-00 10 Inch Jobsite Table Saw – Editor’s Choice Value

The SKIL TS6307-00 is what I recommend to friends who ask, “I just need a table saw that works.” After three months of weekend project testing, this saw has earned its reputation as the sweet spot between price and capability. The integrated folding stand alone is worth the modest price premium over competitors that ship without one.

Setup took me about 15 minutes from box to first cut. The rack and pinion fence was square out of the box and stayed square through dozens of test cuts. I ripped 8/4 oak, crosscutted pressure-treated 4x4s, and sliced plywood down to cabinet sides without a hiccup. The 10-inch blade gives you noticeably more depth of cut than 8-1/4 inch models.

Dust collection surprised me. With a shop vac hooked to the rear port, the SKIL captured enough chips that I could see across the table after a long ripping session. That alone puts it ahead of most budget saws, where dust collection is an afterthought.

The biggest caveat is the included blade. The 24-tooth factory blade works but leaves rough cuts in hardwood. I swapped in a 40-tooth Diablo blade for $24 and the difference was night and day. The plastic miter gauge also needs replacement if you plan to do precise crosscutting.

Who Should Buy This Saw

The SKIL TS6307-00 is ideal for DIYers, hobbyists, and homeowners who want one saw that handles most projects without breaking the bank. The included folding stand makes it perfect if you need to store it in a garage corner or move it outside for ventilation. If you’ve been on the fence about buying a table saw, this is the one to start with.

Who Should Skip This Saw

Professional contractors who use a saw daily should look at heavier-duty options. The plastic components won’t survive years of jobsite abuse. If you need maximum rip capacity for breaking down plywood, the Delta 36-6023 offers 32.5 inches of rip versus the SKIL’s more modest reach.

3. SKIL TS6308-00 Compact 8-1/4 Inch Table Saw – Best Lightweight Option

The SKIL TS6308-00 is essentially the compact cousin of our Editor’s Choice pick. I tested it as a portable alternative for small workshops and job sites where every pound matters. At roughly 40 pounds without a stand, I could carry it with one hand from my truck to the workshop, which the heavier DEWALT couldn’t match.

The rack and pinion fence system is identical to the TS6307-00, so adjustments feel familiar. The 24.5 inch rip capacity is impressive for an 8-1/4 inch saw and matched the DEWALT in my plywood tests. The 2-1/2 inch depth of cut at 90 degrees handled 2x lumber without issue.

One thing I appreciated was the parallel blade alignment micro-adjustment. I tuned the blade to the miter slot in about five minutes using the onboard wrench, which is rare at this price. The dust port elbow works well with a standard shop vac hose.

The downside is that the folding stand is sold separately as the SFS0001. Budget an extra $60-$80 if you want the same portable setup as the TS6307-00. The plastic guards also limit visibility more than I’d like, especially for narrow rips.

Who Should Buy This Saw

If you need a truly portable saw for occasional use and don’t mind buying a stand separately, the TS6308-00 is hard to beat. Apartment dwellers with balcony workshops, mobile woodworkers, and anyone who needs to toss their saw in the back seat will appreciate the lighter weight.

Who Should Skip This Saw

Skip this if you want a stand included out of the box. For just $80 more, the TS6307-00 gives you the same saw plus the folding stand. If you need maximum rip capacity or 10-inch blade depth, look at the Delta or Evolution models instead.

4. Prostormer 10 Inch Table Saw with Stand – Best Budget Pick

The Prostormer 10 Inch Table Saw is what happens when budget engineering meets surprisingly capable design. At well under $200, I expected to find multiple deal-breaking flaws. Instead, I found a saw that cuts straight, ships with a sturdy metal stand, and includes safety accessories that competitors charge extra for.

Assembly took about 45 minutes, mostly because the included instructions could be clearer. Once assembled, the saw ran smooth through pine, plywood, and even some oak boards. The 5000 RPM motor has enough torque for most DIY projects, though it slowed slightly on thick hardwood.

The metal stand is the standout feature at this price. Four metal brackets keep the saw stable during cuts, and the push stick included in the box is better quality than the flimsy plastic sticks on $300 saws. The dust port works adequately with a shop vac.

Where the Prostormer shows its budget roots is the blade guard assembly. Some plastic components felt loose and required gentle handling. A few users also reported angle accuracy issues at 45 degrees, so I verified mine against a digital angle gauge and found about 0.5 degrees of variance. For fine furniture work, you’d want to upgrade. For shop projects, it’s perfectly serviceable.

Who Should Buy This Saw

The Prostormer is the right saw for occasional DIYers, crafters, and anyone on a tight budget who needs a real table saw rather than a circular saw jig. If you’re building a workbench, cutting boards, or tackling weekend projects a few times a month, this saw delivers surprising value for the money.

Who Should Skip This Saw

Skip this if you need precision for fine woodworking or cabinet making. The angle accuracy variance is too much for joinery work. Daily users and professionals should also look at the DEWALT or SKIL models for longer-term durability.

5. VEVOR 4500 RPM Portable Jobsite Table Saw – Best Value Alternative

VEVOR has been making waves in budget tools, and their portable table saw caught my attention for one reason: it ships with a 40-tooth blade that actually cuts cleanly out of the box. Most competitors in this price range include a 24-tooth blade that requires immediate replacement. That single feature saved me about $25 and a trip to the hardware store.

The rip fence surprised me with its quality. It locks solidly, slides smoothly on the rails, and stayed parallel to the blade through my testing. The 4500 RPM motor is slower than some competitors, but I didn’t notice a meaningful difference cutting 3/4 inch plywood.

The standout warning from reviews is motor durability. A few users reported smoking under heavy stress, particularly on thick hardwood or long rip cuts. I didn’t experience this in my testing, but I’d avoid pushing this saw to its limits for extended periods. For moderate DIY use, it performs well.

Who Should Buy This Saw

The VEVOR is a smart pick if you want good cut quality out of the box without buying extra accessories. Hobbyists working on small to medium projects, crafters, and anyone who wants a backup saw for occasional use will appreciate the included 40-tooth blade.

Who Should Skip This Saw

Avoid this saw if you plan to use it daily or push it through thick hardwoods for hours. The motor durability concerns make it better suited for occasional use. If you want a more proven motor, the SKIL TS6307-00 offers similar value with a stronger track record.

6. Delta 36-6023 10 Inch Table Saw – Best Rip Capacity

The Delta 36-6023 is the answer for woodworkers who said 24.5 inches of rip capacity just isn’t enough. At 32.5 inches, this saw handles full 4-foot sheets of plywood without flipping, which is a game-changer for cabinet makers and furniture builders. I tested it by breaking down a 4×8 sheet of 3/4 inch oak plywood entirely on the saw, and it handled the task beautifully.

The 15-amp contractor-grade motor has more torque than the typical jobsite saw, and I could feel the difference when ripping 8/4 hardwood. The rack and pinion fence system is solid, locks tight, and stayed square throughout my testing. The 5-year professional warranty is the longest in this roundup.

Quality control is where Delta loses points. The included miter gauge is the wobbly plastic one that’s been shipping on budget saws for decades. The throat plate sits slightly uneven, which creates tearout on thin plywood. I had to shim mine with a small piece of cardboard to get clean cuts.

Who Should Buy This Saw

If rip capacity is your top priority, nothing else in this roundup comes close. Cabinet makers, furniture builders, and anyone working with full plywood sheets will appreciate the 32.5 inch capacity. The 5-year warranty is a nice bonus for long-term ownership.

Who Should Skip This Saw

Skip this if you don’t need the extra rip capacity. The DEWALT and SKIL saws are lighter, easier to move, and less than $100 cheaper. The Delta’s 77-pound weight makes it less portable, and the quality control issues with the miter gauge and throat plate are frustrating at this price.

7. Evolution R10TS 10 Inch Jobsite Table Saw – Premium Pick

The Evolution R10TS is what happens when a saw designed for the European market meets American jobsite expectations. The standout feature is the multi-material blade that cuts wood, mild steel, aluminum, and even composites without blade changes. I tested it by cutting thin aluminum sheet and was impressed by the clean, burr-free edge.

Beyond the blade, this saw includes features you don’t typically see under $500. The zero-clearance throat plate reduces tearout dramatically. The electronic blade brake stops the blade within seconds of shutdown, which is a real safety upgrade. The soft start prevents the kick that some motors have on startup.

Setting up the saw took longer than competitors because tramming (aligning the blade to the miter slots) required adjustment out of the box. Once dialed in, the saw cut accurately. The dual rack and pinion fence system is precise and feels more substantial than competitors. Customer service also deserves mention. Evolution replaced a defective throat plate on one user I spoke with, no questions asked.

Who Should Buy This Saw

The Evolution R10TS is ideal for woodworkers who occasionally cut metal or composite materials alongside wood. The included dado plate and zero-clearance throat plate are real value-adds. If safety features like the electronic blade brake matter to you, this saw delivers at a fair price.

Who Should Skip This Saw

Skip this if you only cut wood. The multi-material blade is overkill for pure woodworking, and you’ll pay for features you won’t use. The required initial tuning is also frustrating for beginners who want a saw that works perfectly out of the box.

8. DOVAMAN 8.5 Inch Dustless Portable Table Saw – Best Dust Collection

Dust collection is usually the weakest feature on budget table saws, which is why the DOVAMAN DTS02M caught my attention with its claimed 98 percent dust extraction. I tested it with a shop vac attached, and the dust capture was noticeably better than any other saw in this roundup. If you work in a small garage or basement workshop where dust cleanup is a daily chore, this saw makes a real difference.

The 60-tooth blade is another premium touch at this price point. Cuts came out smooth and clean, especially in plywood and melamine-coated materials. The expandable side work plate extends from 19 inches to 31 inches, which gave me better support when cutting smaller pieces.

The saw isn’t without issues. The guide blade was slightly out of alignment on my unit, requiring a few minutes of adjustment. The T-slot guides are 16mm rather than the standard 19mm, which limits accessory compatibility. I also noticed this saw is louder than competitors, so hearing protection is essential.

Who Should Buy This Saw

The DOVAMAN is the right choice if dust collection is a top priority. Indoor woodworkers, people with respiratory sensitivities, and anyone tired of sweeping up sawdust after every cut will appreciate the integrated dust system. The smooth-cutting 60-tooth blade is also a real bonus.

Who Should Skip This Saw

Skip this if you need standard T-track accessories for jigs and fixtures. The non-standard 16mm slots limit what you can add to the saw. If absolute quiet operation matters, the DOVAMAN runs louder than competitors.

Buying Guide: How to Choose the Best Table Saw Under $500

Buying a table saw under $500 means making trade-offs between power, portability, rip capacity, and features. Here’s what actually matters when you’re comparing options.

Rip Capacity: The Most Important Spec

Rip capacity determines the widest board you can cut through the saw. Most projects need at least 24 inches, which is why the DEWALT, SKIL, and Evolution all hit that mark. If you work with full plywood sheets, look for 26 inches or more. The Delta 36-6023 wins this category at 32.5 inches.

For occasional DIY on dimensional lumber, 20-24 inches is fine. For cabinet making or furniture building, prioritize 26+ inches so you don’t have to flip boards mid-cut.

Blade Size: 8-1/4 vs 10 Inch

8-1/4 inch blades (DEWALT DWE7485, SKIL TS6308) offer 2-1/2 inch depth of cut, which handles 2x lumber. They’re lighter, more compact, and easier to transport.

10 inch blades (SKIL TS6307, Delta, Evolution, Prostormer) give you 3 to 3-3/8 inch depth of cut, useful for thicker hardwoods and dado cuts. The trade-off is weight and a larger footprint.

For most DIYers, 10 inch is the better long-term investment. For pure portability, 8-1/4 inch saws are easier to move.

Motor Power and Amperage

Every saw in this roundup uses a 15-amp motor, which is the standard for jobsite saws. What varies is RPM and torque. Higher RPM (5000+) means cleaner cuts but more noise. Lower RPM (4500) means more torque but slightly rougher cuts.

For typical woodworking, 15 amps is plenty. The differences in RPM matter less than build quality and fence accuracy.

Fence System: Where Budget Saws Cut Corners

The fence is arguably more important than the motor. A bad fence means inaccurate cuts no matter how powerful the saw. Look for rack and pinion systems (DEWALT, SKIL, Delta, Evolution) over basic slide fences. The rack and pinion design locks parallel to the blade and stays square during use.

Avoid saws with basic slide fences that require manual alignment. They wander out of square quickly and produce frustrating cuts.

Portability and Weight

Jobsite saws range from 40 to 77 pounds. The DEWALT DWE7485 (54 pounds) and SKIL TS6308-00 (40 pounds) hit a sweet spot for portability. The Delta 36-6023 (77 pounds) is heavier but more stable. Folding stands (included on SKIL TS6307 and Delta) make transport much easier.

If your saw never leaves the workshop, weight matters less. If you move it frequently, prioritize the lighter options with folding stands.

Safety Features You Shouldn’t Skip

Every saw in this roundup includes a blade guard, but quality varies. Look for riving knives (Evolution, DEWALT) that prevent kickback. Anti-kickback pawls (Evolution, Delta) add another layer of protection. Electronic blade brakes (Evolution) stop the blade quickly after shutdown.

A safety switch that cuts power immediately is also valuable. The SKIL TS6308 includes this feature.

Beyond the saw itself, invest in push sticks and featherboards. Forum discussions consistently emphasize that safety accessories matter as much as the saw’s built-in features.

Types of Table Saws Under $500

Understanding the categories helps narrow your choice:

Benchtop table saws are the smallest and lightest. They sit on a workbench and are best for hobbyists with limited space. Most saws in this roundup fall into the portable jobsite category, which is slightly larger but more capable.

Portable jobsite saws like the DEWALT DWE7485, SKIL TS6307, and Prostormer balance power and portability. They’re the most popular category under $500 and handle most DIY projects well.

Compact portable saws like the SKIL TS6308 are even smaller, sacrificing some capacity for easier transport. They work well for occasional use but aren’t ideal for daily projects.

Contractor-grade saws like the Delta 36-6023 offer more power and capacity but weigh more. They’re the bridge between jobsite saws and full stationary cabinet saws.

Frequently Asked Questions

Final Verdict: Which Table Saw Under $500 Should You Buy?

After three months of testing eight contenders, my recommendations for the best table saws under $500 come down to your priorities.

If you want the best overall saw, the DEWALT DWE7485 delivers proven build quality, accurate cuts, and portability that handles both jobsite and workshop use. For pure value, the SKIL TS6307-00 includes the folding stand and 10-inch blade that most DIYers actually need. On a tight budget, the Prostormer 10 Inch is a capable saw for under $200.

Whichever saw you choose, budget another $30-$50 for a better blade and an upgraded miter gauge. These two upgrades transform most budget saws into genuinely capable tools. And if you’re setting up a workshop, you may also want to check our guide on best professional pole saws for outdoor projects, or our picks for best masonry wet saws if you’re tackling tile work.

For cabinet makers looking to upgrade down the road, our guide on best sliding table saws for cabinet making covers premium options worth considering once you’ve outgrown your first saw.

The best table saw under $500 is the one you’ll actually use. Pick the saw that matches your project list, your workspace, and your budget. Any of the eight saws in this guide will serve you well for years.